
Laboratory Products Sealing Deep Well Microplate Transparent Film for PCR
The sealing membrane MSB1001 of 96-well PCR plate is made of hot melt adhesive and can withstand 92℃ water bath temperature. At the same time, the sealing plate film is good viscosity, as long as there is no pollution and reduce the viscosity, can be repeatedly glued 3-5 times. Is transparent material, easy to observe the color change in the hole, but not suitable for the application of light protection conditions, such as fluorescence detection.
We have combined our own technical advantages and used years of experience to develop various Plain Microscope Glass Slide 7101, plastic pipette tips, 100ml Sterile Urine Containers. With the most advanced production technology and high-quality supporting services, our products are appreciated by our customers. Our company will take good professional ethics, high-quality after-sales service, and reasonable prices to eliminate worries for the majority of users. We sincerely hope that through our services, the product quality of our users can reach high standards and achieve greater economic benefits. We continue to introduce new technologies, new equipment and high-tech talents, carry out quality, technology, and management innovations, and improve the quality of pre-sales and after-sales services to meet the needs of new and old customers. Looking back on the past and looking to the future, the company will be guided by the national market, rely on capacity expansion, based on quality control, brand communication as a means, market sales as the focus, capital operation as the link, and corporate culture as the support. Realize the grand goal of the company: to be a benchmark enterprise with cost-effectiveness in China, and to create an influential leading brand in China! Our company has strong production technology and new product development capabilities.
Introduction:
The sealing membrane MSB1001 of 96-well PCR plate is made of hot melt adhesive and can withstand 92℃ water bath temperature. At the same time, the sealing plate film is good viscosity, as long as there is no pollution and reduce the viscosity, can be repeatedly glued 3-5 times. Is transparent material, easy to observe the color change in the hole, but not suitable for the application of light protection conditions, such as fluorescence detection.
Feature:
1. Color:Withe
2. Material: Polypropylene
3. Size:13cm*8cm
4. Packing:100pcs/box.2000pcs/ctn
5. Bag:Opp bag
6. Application:96 Well PCR Plate,convex.
Code | Material | Ctn Size(mm) | Products size(CM) | Packing |
TYA-F | Polypropylene | 52*40*30 | 13*8 | 100pcs/box.2000pcs/ctn |
Detail photos:

Advantage:
1, high light transmittance, good sealing, increasing rate, in quantitative PCR experiment
2, easy to paste, no degumming, no pollution, convenient sealing plate operation
3. No Dnase, Rnase
4. can be used for all 96-well plates
PCR membrane type:
1, ordinary PCR seal plate membrane:Suitable for PCR reaction, two olefinic membrane material is gatheredRNase/DNase and nucleic acid freeThe sealing plate is easy, not easy to curlWorking temperature - 40 - + 120 ℃ are operational
2, fluorescence quantitative PCR sealing membrane:Ming, low autofluorescence interference, suitable for fluorescence quantitative PCR experimentsSuitable for all kinds of PCR plate, do not belong to the puncture filmDNase/RNase and nucleic acid free, DMSOThe sealing plate is easy, not easy to curlWorking temperature - 70 - + 100 ℃
3, PCR aluminum plate membraneThe permeability of soft aluminum film, adhesive for medical level strong adhesive, suitable for long-term preservation samples compared with other aluminum sealing plate membrane, this film is stripped from the board, not easy to curlExcellent anti evaporation properties, almost no sample evaporation, easily piercedDNase/RNase and nucleic acid freeSuitable for all kinds of PCR plate, including have a bump on the edge of the plate
Question&Answer:
1.How about the delivery time?
Sample for free,it will arrive at destination within 3-7 days by DHL FEDEX UPS.
Small quantities,it will arrive at destination within 5-10 days by air.
Large quantities,it will arrive at destination within 25-35 days by sea.
2.Where are your manufacturer?
Our factory is local in Chongqing.
3.What can you buy from us?
Centrifuge tube,cryotube,filter tips,pipette,glass slide,cover glass,flocked swab,female swab,gel swab,blood collection lancet,blood collection tube,glucometer,glove,gown and so on.
No matter new customer or previous client, We believe in prolonged time period and trustworthy relationship for Laboratory Products Sealing Deep Well Microplate Transparent Film for PCR. We always focus on our main business operations and pursue technology leadership in the global industry. We actively promote the change of development mode, increase the quantity and quality to expand the efficiency.
Hot Tags: laboratory plastic transparent clear optical pcr film for pcr plate, China, manufacturers, factory, customized, wholesale, free sample, 75 isopropyl alcohol pad, 40well Tube Rack, Erlenmeyer Flask Bottle 500ml 1000ml, medical tourniquet, Biohazard Waste Specimen Transport Bags, Pipette Holder 6 Holes For Pipette
[[ProKeywords]]Send Inquiry






